شركة وصلات الكويت | WASALAT KUWAIT CO تركيب وصيانة كاميرات مراقبة، فني انتركم، تركيب أجهزة بصمة الكويت، فني انترنت، أنظمة إنذار، فني سماعات سقف، فني بدالات، تمديد وايرات
Related Articles
In a hypothetical Sulaibiya shop, you might notice rolling bands appearing on your monitor as soon as a specific light is turned on. It is important to note that the appearance of these bands on the picture alone does not establish a hardware fault or a defective component. As a CCTV technician in Sulaibiya, I recommend that you first isolate the conditions before attempting to change any exposure settings on your recording equipment.
To arrange an assessment, call Wasalat Kuwait on 51050078 WhatsApp.
Investigating Pulsing Bands in Sulaibiya
- Start by comparing short video clips captured from the same camera channel under different lighting conditions to identify which specific light source and time of day coincide with the observed effect.
- If the pulsing bands occur exclusively under artificial lighting, consult the official exposure guide for your specific camera model to see if the device provides a dedicated flicker-reduction setting.
- When a frequency option is available in the interface, apply the setting documented for your local installation environment and evaluate the resulting exposure quality rather than attempting to guess or adjust levels randomly.
Acceptance Testing and Verification
During the final handover process, you must repeat the troublesome lighting condition while the system is active to confirm that the picture still records the required moving subject clearly enough for your needs.
Frequently asked questions
Why does the light look normal to me but not to the camera?
An artificial light source can appear perfectly steady to the human eye even when the camera sensor detects rapid brightness variations, which is why visual inspection alone is often insufficient.
Are all exposure settings the same for every camera?
Axis devices offer various exposure modes, but their specific availability and configuration depend entirely on the particular hardware model installed at your site, so always check your device documentation.
Will changing the shutter speed mode affect the image brightness?
Axis documents specific modes that limit the range of shutter speeds available, and you should expect the overall exposure behavior to change significantly when such a mode is selected.
